STM-620A Portable LED Tower Signal Light
一、Business
“Bright Aviation” supplies complete sets of equipment, including technical consultation, spare parts supply, installation and commissioning, after-sales service, panel repair and other businesses.
二、Overview
The portable LED tower signal light is used for airport ATC air traffic and ground control scenarios. When the VHF communication between the airport tower controller and the flight crew is completely interrupted, the controller can send red, green and white signals with the help of the equipment to command the approaching flight.
三、Appearance
![]() | ![]() |
四、Performance
1. The service life of LED signal light is ≥ 60000 hours.
2. The LED signal light is red, green and white.
3. No optical calibration is required after replacing the LED module or lens.
4. Visible distance ≥ 6.6 km (4.1 miles) under clear and cloudless conditions.
5. Color selection: controlled by switch.
6. Two position switch, supporting Morse code or continuous light mode.
7. The top of the signal lamp is equipped with a sight system.
8. Operation mode: manual or automatic, which can be switched by pressing the key.
五、Parameter
1. Protection grade: IP34.
2. Working temperature: -30 ℃~+55 ℃.
3. Lithium battery and adapter: built-in lithium battery and protection circuit. Battery life ≥ 10 years. Continuous use ≥ 8 hours, can be used while charging, charging time 3-4 hours. The charging input voltage is 110~220Vac±15%, 45~63Hz, single-phase.
4. Power consumption: ≤ 36 watts.
5. Product size: 36 (L) * 24 (W) * 24 (H) cm.
6. Net weight: 2.80 kg. Package: Portable bag (37 (L) * 25 (W) * 25 (H) cm.
7. Photometric performance (light source brightness):
Red | Green | White |
14,000 cd | 11,500 cd | 20,000 cd |
The beam spread angle is between 1° and 3° | ||
|
|
|
六、Signal Lamp Description
Signal color and type | Mobile vehicles, equipment and personnel | Ground aircraft | Aircraft in flight |
Green fixing | Permit crossing, passage or movement. | Permission to take off. | Permission to land. |
Green flash | Not applicable. | Taxi is allowed. | Return to landing (it is required to cooperate with the stable green signal at that time). |
Red fixing | Stop! | Stop! | Avoid other aircraft and continue to circle. |
Red flash | Exit the taxiway/runway. | Leave the runway in use. | The airport is unsafe. No landing. |
White fixing | Return to the starting position of the airport. | Return to the starting position of the airport. | Not applicable. |
Flashing red and green alternately | Extreme caution! | Extreme caution! | Extreme caution! |
七、Meeting Standards
1. Comply with ICAO Annex 14 VOL1.
2. Comply with ICAO Annex 2 and have a test report.