Product

Product Overview

Power divider, also known as "3dB power divider", divides the input RF signal into two parts and divides the power equally. The RF phase difference is not considered temporarily. The S terminal of the power divider is the RF signal input terminal, and the 1 and 2 terminals are the output terminals. For example, the input power of the RF signal at the S end is 1W, and after passing through the power divider, the output power of the 1 and 2 ends is 0.5W respectively.

Combiner, also known as "3dB Combiner", combines two input RF signals into one, power synthesis, and RF phase difference are not considered temporarily. The 1 and 2 terminals are RF signal input terminals, and the S terminal is output terminal. For example, the input power of terminals 1 and 2 is 0.5W respectively. After passing the combiner, the output power of terminal S is 1W.

Product performance

1、wideband：5 to 500 MHz

2、Power Input (as a splitter) ：1W max.

3、excellent amplitude unbalance： 0.1 dB typ.

4、excellent isolation：28 dB typ（good VSWR, 1.2:1 typ.）.

5、Input/output impedance：50Ω.

6、Connectors Mode：N-TYPE/BNC.

Product application

一、ZFSC-2-1-N+

1、wideband：5 to 500 MHz

2、Power Input (as a splitter) ：1W max.

3、Internal Dissipation：0.125W max.

4、Connectors Mode：N-TYPE.

5、Product appearance, as shown in the figure below.

二、ZFSC-2-1-B+型射频信号功分器/合路器

1、wideband：5 to 500 MHz

2、Power Input (as a splitter) ：1W max.

3、Internal Dissipation：0.125W max.

4、Connectors Mode：BNC.

5、Product appearance, as shown in the figure below.