Product

Product Introduction 1：

ZFSC-2-1-N+ type RF signal power divider/combiner, maximum input power 1W, insertion loss less than 0.1W, port type: female N-type, operating frequency range: 5MHz to 500MHz.

When the device is used as a power divider, it is also known as a "3dB power divider". The S port is the RF signal input port, and ports 1 and 2 are the output ports. For example, if the RF signal input power at port S is 1W, after power division, the output power at ports 1 and 2 will each be 0.5W. The isolation between the S port and ports 1 and 2 is -28dB.

When used as a combiner, this device is also known as a "3dB combiner". Ports 1 and 2 are the RF signal input ports, and port S is the output port. For example, if the input power at port 1 and port 2 is 0.5W each, after power combining, the output power at port S is 1W. The isolation between port S and ports 1 and 2 is -28dB.

The figure below is the diagram of the ZFSC-2-1-N+ type RF signal power divider/combiner.

Product Introduction 2：

ZFSC-2-1-B+ type RF signal power divider/combiner, maximum input power 1W, insertion loss less than 0.1W, port type: BNC female, operating frequency range: 5MHz to 500MHz. ZFSC-2-1-N+ type and ZFSC-2-1-B+ type RF signal power dividers/combiners are basically interchangeable, the difference is in the port type.

The figure below is the diagram of the ZFSC-2-1-B+ type RF signal power divider/combiner.

ZFSC-3-1-S+型功分器，基本功能相同。